A new design for a microstrip-fed slot antenna (MFSA) is proposed and developed for improving bandwidth, gain and reducing back radiation. In contrast with most unidirectional MFSA, a metasurface as a superstrate is employed to reduce the back-lobe radiation and enhance the gain without a metal reflector.

• Microstrip Slot Antenna Microstip slot antenna is very simple in structure: it consists of microstrip feed that couples electromagnetic waves through the slot above and slot radiates them. A microstrip-fed slot antenna offers a better isolation between the feed and the material under measurement compared to the microstrip-fed microstrip antenna 3.
• The U-slot patch The L-probe fed patch. 2.7 Patterns of a rectangular electromagnetically coupled patch antenna. Method analysis and a computer program for multi-layer microstrip antennas. Using this program, representative design guides for the configuration of Fig.35, operating.

Advantages and disadvantages of Microstrip Patch Antenna

This page covers advantages and disadvantages of Microstrip Patch Antenna. It mentions Microstrip Antenna advantages or benefits and Microstrip Antenna disadvantages or drawbacks. It provides links on various topics on Microstrip Patch Antenna.

What is Microstrip Patch Antenna?

Introduction:
The microstrip line consists of pattern on one side of the dielectric substrate and ground plane on the other side of it. The microstrip patch antenna has radiating patch on one side and ground on the other. This is shown in the figure.

Thick size dielectric material with lower dielectric constant will provide good antenna performance. It provides better efficiency and better radiation and large operating bandwidth. Microstrip antennas are smaller in size and operates at microwave frequencies.
Refer Microstrip line basics and types>> and Desgin of microstrip patch antenna for mobile>> for more information.

Benefits or advantages of Microstrip Antenna

Following are the benefits or advantages of Microstrip Antenna:
➨They operate at microwave frequencies where traditional antennas are not feasible to be designed.
➨This antenna type has smaller size and hence will provide small size end devices.
➨The microstrip based antennas are easily etched on any PCB and will also provide easy access for troubleshooting during design and development. This is due to the fact that microstrip pattern is visible and accessible from top. Hence they are easy to fabricate and comfortable on curved parts of the device. Hence it is easy to integrate them with MICs or MMICs.
➨As the patch antennas are fed along centerline to symmetry, it minimizes excitation of other undesired modes.
➨The microstrip patches of various shapes e.g. rectangular, square, triangular etc. are easily etched.
➨They have lower fabrication cost and hence they can be mass manufactured.
➨They are capable of supporting multiple frequency bands (dual, triple).
➨They support dual polarization types viz. linear and circular both.
➨They are light in weight.
➨They are robust when mounted on rigid surfaces of the devices.

Drawbacks or disadvantages of Microstrip Antenna

Following are the disadvantages of Microstrip Antenna:
➨The spurious radiation exists in various microstrip based antennas such as microstrip patch antenna, microstrip slot antenna and printed dipole antenna.
➨It offers low efficiency due to dielectric losses and conductor losses.
➨It offers lower gain.
➨It has higher level of cross polarization radiation.
➨It has lower power handling capability.
➨It has inherently lower impedance bandwidth.
➨The microstrip antenna structure radiates from feeds and other junction points.

Advantages and Disadvantages of other wireless technologies

What is Difference between

difference between OFDM and OFDMA
Difference between SC-FDMA and OFDM
Difference between SISO and MIMO
Difference between TDD and FDD
FDMA vs TDMA vs CDMA
FDM vs TDM
CDMA vs GSM

RF and Wireless Terminologies

Share this page

Translate this page

International Journal of Scientific & Engineering Research, Volume 5, Issue 6, June-2014 1469

ISSN 2229-5518

Sujeet Kumar Yadav, Kirti Vyas, Sudarshan Kumar

Abstract- Here in this paper a compact microstrip antenna having wide-slots of hexagon shape is fed by microstrip-line for wideband and multi band operations is proposed and studied. The proposed antenna resonates the 10-dB bandwidth from 0 to 6.0 GHz, and these frequency bands cover the standard IEEE 802.11b/g (2.4-2.485 GHz) and IEEE 802.11a (5.15-5.35 GHz) for WLAN applications and 2.5

GHz (2.5-2.69 GHz), 3.5 GHz (3.3-3.8 GHz) and 5 GHz (5.25-5.85 GHz) for Wi -MAX applications. Detailed design and experimental

results are shown and discussed in this paper. The antenna is simulated using IE3D electromagnetic simulator. Here in this paper the improvement in multiband and wide band behavior is investigated & discussed with VSWR<2.

Index Terms- IE3D, Microstrip line, Microstrip Slot Antenna (MSA), Multiband, Resonant Frequency.

——————————  ——————————

I. INTRODUCTION

Microstrip patch antennas are low profile, conformable to planar and non planar surfaces, simple and less expensive in manufacturing using modern printed circuit technology. The main objective in the wireless communication system is the design of wideband or even multiband low profile and small antenna. One such antenna that meets these requirements is the slot Antenna [1]. There are numerous techniques such as shorting pins, introducing slots and fractal geometries that reduce the size of the patch antenna. Micro strip slot antennas (MSAs) have the advantages of being able to produce bidirectional and unidirectional radiation patterns with larger bandwidth and very low cross polarization (typically -35dB) as compared to microstrip patch antenna [2]. In, Microstrip slot antenna, the strip and slot combination offer an additional degree of freedom in the design of microstrip antennas. A microstrip slot antenna comprises a slot cut in the ground plane of the micro strip line such that the slot is perpendicular to the strip conductor of the microstrip line .The field of the microstrip line excite the slot. For efficient excitation of the slot the strip conductor is either short circuited through the dielectric substrate to the edge of the slot, as shown in figure (a) or the strip conductor is terminated in
an open circuited stub beyond the edge of the slot, as
shown in figure (b) [3].
Figure 1 (b). Figure 1 (a)

Centre- fed micro strip slot antenna configurations: (a) Micro strip terminated in a short circuited- stub (b) Micro strip terminated in an open circuited- stub

The regular MSA configurations, such as rectangular and
circular patches can be modified to rectangular and circular ring, respectively, to enhance the BW. The larger BW is because of a reduction in the quality factor Q of the
patch resonator, which is due to less energy stored

IJSER © 2014 http://www.ijser.org

International Journal of Scientific & Engineering Research, Volume 5, Issue 6, June-2014 1470 https://luckystrategy.netlify.app/play-slots-for-fun-with-free-games.html.

ISSN 2229-5518

beneath the patch and higher radiation. When a U-shaped slot is cut inside the rectangular patch, it gives a BW of approximately 40% for VSWR <2. Similar results are
obtained when a U-slot is cut inside a circular or a
28mm and the width is 38mm. The dimensions of the patch are calculated according the given formula as shown below.
triangular MSA [4]. But as the Antenna size reduces, its parameters such as gain, efficiency and polarization
deteriorates. This occurs due to the impedance

𝑊 =

𝑐

2𝑓0

2

�

𝜀𝑟 + 1

(1)

mismatching that occurs between the source and the

𝜀𝑟𝑒𝑓𝑓 =

(𝜀𝑟+1)

2

+ (𝜀𝑟−1)

2

(1 +

12ℎ

𝑤

)−� �2� (2)

antenna. Microstrip slot antennas have numerous promising features but they suffer from undesired modes

𝐿 = 𝑐

𝑒𝑓𝑓 2𝑓0� 𝜀𝑟𝑒𝑓𝑓

(3)

𝑤

such as the parallel plate mode excited between the
ground planes of the strip line. One additional drawback

∆𝐿 = 0.412ℎ

� 𝜀𝑟𝑒𝑓𝑓 + 0.3�( ℎ + 0.264)

� 𝜀 − 0.258�(𝑤 + 0.8)

(4)

is it’s inherently bidirectional radiation which can be corrected by using a metallic cavity or a metallic reflector on one side. This antenna works on various frequencies between 0 GHz to 6 GHz, which includes the applications in WLAN, Satellite mobile communication & Wi-Max [5]- [6].

II. ANTENNA DESIGN

The proposed antenna is simulated and designed on the Glass-Epoxy/FR4 substrate. The relative dielectric constant of the FR4 is 4.4 and loss tangent is 0.02, although the loss tangent of the FR4 is high but it is less expensive and easily available. The dimension of the rectangular patch is calculated at the resonance frequency at 2.4 GHz. The length of the patch is

𝐿 = 𝐿𝑒𝑓𝑓 − 2∆𝐿 (5)

c = Velocity of light in free space
f 0 =Operating resonant frequency
ɛr = Relative dielectric constant
ɛreff =Effective dielectric constant of the substrate
h= Height of the substrate w = Width of the substrate
The three structure of the patch antenna is designed. One
is simple rectangular patch of given dimension, another one with a rectangular patch with a single hexagonal slot
,the dimension of the hexagon is 10mm and the third
structure is rectangular patch with five hexagon slots, in which one hexagon has the same dimensions as in second structure and another four hexagons have dimensions of
10/3mm each. These four slots are symmetrically located
at the coordinates at (9, 12), (9,-12), (-9, 12) and (-9,-
12).The feeding techniques use in all the structures is the microstrip line feeding .The microstrip line has the dimensions of 3x10mm.In all the structures the microstrip
line is at the same distance from the radiating edge of the
patch antenna[7]. Structures of the proposed work are shown below.

IJSER © 2014 http://www.ijser.org

International Journal of Scientific & Engineering Research, Volume 5, Issue 6, June-2014 1471

ISSN 2229-5518

III. SIMULATION RESULTS & DISCUSSION
(a) (b)

(c)

Fig 2: Antenna Design (a) zero slot (b)

single slot (c) five slots

The third design of antenna is fabricated and tested the simulated results related to this design. The photo of fabricated antenna is shown below.

Fig 3: Microstrip path antenna having with hexagon slot With all these designs the resulted resonance frequencies are as listed below.

TABLE 1: Antenna designs and observed resonance

frequencies

The proposed antenna is simulated over Integral
Equation in 3 Dimension (IE3D) software as simulation tool. Characteristics of a hexagonal shape Microstrip patch antenna for wideband and multiband applications have been analyzed in term of various parameters like return loss, Total Field Gain, Directivity, Radiation pattern & VSWR etc. Multiband behavior is achieved at frequency of 2.4GHz, second band is at 3.7 GHz and third band is obtained at 5.3 GHz frequency for Microstrip antenna designed for 2.4 GHz with no slots[8]-[9]. Following are the various results obtained for the above mentioned design

Microstrip Patch Antenna Ground Plane

[A] Return Loss curve:

Figure (4) (i) Return loss for antenna ‘a’

IJSER © 2014 http://www.ijser.org

International Journal of Scientific & Engineering Research, Volume 5, Issue 6, June-2014 1472

ISSN 2229-5518

Figure (4) (ii) Return loss for antenna ‘b’

Figure (4) (iii) Return loss for antenna ‘c’

[b] Comparison between simulated and measured result for antenna having five slots

Figure (5)

[c] Total Field gain vs. Frequency curve

Figure (6) (Total Field Gain vs. Frequency For zero, single and five slots)

Black curve ---- zero slot Violet curve --- single slot

Green curve --- Five slots

0

R

E -5

T -10

U -15

R

N -20

Microstrip Antenna Design Handbook

L -25

O -30

S

S -35

-40

FREQUENCY(GHz)

0 2 4 6 8

SIMULATED MESURED

[d] Total Field Directivity vs. Frequency curve:

IJSER © 2014 http://www.ijser.org

International Journal of Scientific & Engineering Research, Volume 5, Issue 6, June-2014 1473

ISSN 2229-5518

Figure (7)

(Total Field Directivity Vs Frequency For 0, 1 & 5

hexagonal slots)

[e] VSWR curve:

Figure (8) (i) VSWR for antenna ‘a’
Figure (8) (ii) VSWR for antenna ‘b’
Figure (8) (iii) VSWR for antenna ‘c’ [f] Radiation Pattern Curve:

IJSER © 2014 http://www.ijser.org

International Journal of Scientific & Engineering Research, Volume 5, Issue 6, June-2014 1474

ISSN 2229-5518

(3D Radiation pattern for zero slots at 5.39 GHz)

Figure (9) ( i)
Figure (9) ( ii)

(3D Radiation pattern for single slot at 4.26 GHz)

Figure (9) ( iii)

(3D Radiation pattern for iteration 2 at 5.32 GHz)

VI. CONCLUSION
In this work three structure of rectangular patch antenna is studied. Three structure of patch antenna with zero slot, single hexagon slot and five hexagon slots are simulated and the geometry with five slots is fabricated.
As the number of slots increased, the bandwidth is increased [10]-[11]-[12]. These antennas are used in IEEE
802.11 a, b, g, and Wi-Max applications [13]. In addition, the proposed antennas also have simplicity in structure, compact size and good radiation performances [14]-[15].
REFERENCES
[1] Constantine A. Balanis, “Antenna Theory-Analysis and Design”, John Villey & Son, INC, Third Edition 1995.
[2] Axelrod A.M Kisliuk, and JMaoz, “Broadband
Microstrip-Fed Slot Radiator”, Microwave Journal, June
1989, pp.81-94.
[3]Bahl, I., P.Bhartia, and R. Garg, Microstrip Antenna

Design Handbook, Artech House, 2001.

[4] Girish Kumar, K.P Ray, “Broadband Microstrip
Antennas”, Artech House, London. Edition 2003.
[5]Wi-MAXForum, http://www.wimaxforum.org/home/, last visited on May 10, 2014.
[6] Ritosa P. , T. Korosec, J. Tratnik, L. Naglic, and B. Batagelj,Adaptive Wi-MAX subscriber antenna for 2.6
GHz and 3.45 GHz,' EUROCON 2009, 46-51, St. Petersburg, Russia,May 2009.
[7] Ray, K. P., D. M. Suple and N. Kant, “Perturbed
Hexagonal Microstrip Antenna for Circular Polarization,”

IEEE, 978-1-4244-4819-7/09, 2009.

[8] Ghaderi, M.R., Mohajeri, F., “A Compact Hexagonal Wide-Slot Antenna with Microstrip-Fed Monopole for UWB Application”, Antennas and Wireless Propagation Letters, IEEE, Volume 10, June 2011, pp 682 – 685.
[9] H. Sabri and Z. Atlasbaf, “Two Novel Compact Triple- Band Microstrip Annular-Ring Slot Antenna For PCS-
1900and WLAN Applications”, Progress In

Electromagnetics Research Letters, Vol. 5, 87–98, and 2008.

[10] Werner, D. H. and R. Mittra, Frontiers in

Electromagnetics, IEEE Press, New York, 2000.

[11] K. Nithisopa1, J. Nakasuwan1, N. Songthanapitak, N. Anantrasirichai, and T. Wakabayashi, “Design CPW
Fed Slot Antenna for Wideband Applications” PIERS ONLINE, VOL. 3, NO. 7, 2007, pp 1124-1127.

IJSER © 2014 http://www.ijser.org

International Journal of Scientific & Engineering Research, Volume 5, Issue 6, June-2014 1475

ISSN 2229-5518

[12] Y.Sung,”Bandwidth Enhancement of a Microstrip Line-Fed Printed Wide –Slot Antenna with a Parasitic Centre Patch”,IEEE Transactions on Antennas & Propagation,Vol. 60,No. 4,April 2012,pp 1712-1716.
[13] W.S.Chen,B.Y Lee,P.Y Chang, “A compact microstrip- line- fed slot antenna with dual band notched for Wi-Max operation,' PIER, Vol. 16, 13-23, 2010.
[14] Mohammad A. Dorostkar, Mohammad T. Islam, and
Rezaul Azim, “design of a novel super wideband circular
hexagonal fractal antenna” Progress In Electromagnetics

Research, Vol. 139, 229-245, 2013

[15] C.J. Wang, S.W. Chang, “Studies on Dual-Band
Multi-Slot Antennas”, Progress in Electromagnetics

Research, PIER 83, 293–306, 2008

IJSER © 2014 http://www.ijser.org